|
|
Pocket IrDA® and Raw IR Flash Disk
IrDA Printer Adapters
IrDA PC RS232 and USB Adapters (Needs No External Power)
- IR210L (Low-Speed
IrDA Motherboard Adapter)
- IR220L+/IR200L/IR220Li
(PC
RS232 Adapters with "Native" Windows Driver)
-
IR220LR/LRS/LRB0/LRN#
(PC RS232 Adapters for Ruggedized, Industrial Applications)
-
ACTiLinkACPI SW (Works
with IR220L+ to Enable RS232 Port Power, for Newer PC)
- IR2002UL (IrReady FIR PC-USB Adapter, supports
Windows 11/10/8.1/8/7/Vista, Windows CE, Mac & Linux)
- IR2012UL (IrReady VFIR PC-USB Adapter, supports
Windows 11/10/8.1/8/7/Vista/XP)
- IR4002US (IrReady FIR USB adapter -Thumb Sized;
supports Windows 11/10/8.1/8/7/Vista, CE, Mac & Linux)
- IR4020U/IR4021U (IrSimple
& IrDA VFIR/FIR USB Adapter, supports
Windows 11/10/8.1/8/7/Vista,
Linux/Mac)
IrDA
Intelligent Embedded RS232 & USB Adapters and Internal Modules
Raw IR (IrPHY only) PC or Embedded RS232 and USB Adapters
-
ACT-IR224UN-Li2/Li -
"Animus Insulin pump (such as the Animas OneTouch Ping or Animas Vibe) patients require an ACTiSYS' IR224UN-Li2/IR224UN-Li infrared (IR) cable, to upload data!"
-
IR224UN (USB to Raw SIR Serial Adapter, IrPHY Only) -
Supports Windows
11/10/8.1/8/7/Vista,Android, Linux,
Windows CE
& Mac
-
IR224UN-L210
(USB
connector of serial Infrared adapter, Compatible
with Tekram IRMate IR210) -
Supports Windows 11/10/8.1/8/7/Vista, Linux, Windows CE & Mac
-
IR424UN (USB to Raw SIR Serial Adapter, Thumb
Sized IrPHY only) - Supports Windows
11/10/8.1/8/7/Vista,Android,
Linux, Windows CE & Mac
-
IR220LN
(PC or Embedded RS232 Cable
Replacement, IrPHY Only)
-
IR220L+/IR200L/IR220Li
(PC
RS232 Adapters with "Native" Windows Driver)
-
IR220LR/LRS/LRB0/LRN#
(PC RS232 Adapters for Rugged, Industrial Applications)
-
IR220LDB-LA
(RS232 Raw IR Adapter PCBA for Display Panel)
IrDA Protocol IC
IrDA SIR Encoder/Decoder IC
IrFM - IrDA Wireless Mobile Payment
IrDA Hand-held BER Tester
IrDA Certification Test Center
NOTE]: For
O.S.
Compatibility
check, go to
COMPATIBILITY
page.
Pocket IrDA & RAW IR Flash Disk
ACT-IR321U
Pocket RAW IR Flash Disk and ACT-IR322U Pocket IrDA
Flash Disk
- A pocket-size data
transfer device, collects data wirelessly from IrDA® or
Raw IR-enabled industrial or medical devices, stores and
sends this stored data to PC, wirelessly via IR.
- Can also download file
from PC, and stores and sends it to industrial or
medical devices, to update or program its
firmware, or change settings, wirelessly via Infrared.
- ACT-IR322U supports
IrDA-IrLAPTM, IrLMPTM, IASTM, and optional IrComm, or
OBEX server/client protocol layers, in both Primary and
Secondary modes, at 9.6k~115.2k bps.
- ACT-IR321U supports
IrDA-IrPHYTM (Raw IR) at data rates, 2.4k to 115.2k bps.
- Through its standard
mini-USB/type B connector, can easily connect to PC-USB
port, to charge its internal Lithium Ion Polymer
battery.
- Rechargeable (Powered
via USB) battery can last approximately 6 days, in
normal usage.
-
Stores collected data in 4
MB flash memory, optional 8 MB memory.
-
4 buttons
with
the corresponding LEDs, enable friendly and easy data
transfer, in the field with industrial or medical
devices, and in the office with PC, all wirelessly.
- If opposite device (e.g.
Healthcare device) sends IrObject (OBEX PUT) data,
ACT-IR322U will act as OBEX server and stores this data
to internal flash memory. Later, it can act as OBEX
client to send this stored (OBEX PUT) data to IrDA-ready
PC (e.g. PC with attached IrDA dongle), and vice versa:
from PC to ACT-IR322U, and to Healthcare or Industrial
devices.
-
A truly compact and
convenient alternative to Infrared-enabled PDA or data
logger!
-
Note:
1. IR322U can only interface
with PC via your existing USB-IrDA adapter, ACT-IR200xUL
and Windows Application software!
2. USB port is "only" for
charging the battery inside IR322U, needs no driver and
you can "ignore" any driver warning or error message!
Order
|
Price
Tech-Support |
(Click
To View Details)
(Video demo on Youtube) |
| |
Approved as a full "IrReady" status. |
IR100M (Parallel Printer Adapter with CEN36 Pass-through, AC
Powered)
- IR100M
series is compatible with all Centronics-B (36 pins) parallel
printers that are compatible with DOS. Also compatible with most Centronics-B printers
that their Windows printer driver use LPT port
with proper driver.
If the printer or multi-function model can not work with
Microsoft Windows LPT port or DOS, it will likely
not work. However, some multi-function printer (MFP) models
have been tested to work well with IR100M series. Please
e-mail irda-info@actisys.com
for updated printer models".
- IR wireless
printing directly from your IrDA devices.
- You can
still print directly from desktop or LAN by connecting the
printer cable to the built-in pass through connector.
- Automatic
switch between mobile IR or desktop cable-based printing.
- LED's indicate
transmission speed and printing status.
- If
your printer's Centronics36 connector is hidden inside (
such as certain LaserJet models), you need to order a
CEN36M/F
cable (ACT1-203) to connect to IR100M
- Please
check the printer adaptor
compatibility
list before you order IR100M.
Order
| Price
List
Tech-Support |
Click for detailed spec. |
IR100MP (Parallel Printer Adapter w/o Pass-through, Needs No External Power!)
- No External
Power, No Battery--IR 100MP is the only IrDA printer adapter
without external power or battery requirement.
- Most efficient
and IrDA compliant protocol stack built in, compatible with
wide range of IrDA enabled devices and Operating Systems
(including all Windows O.S.).
- IR 100MP
enables the most reliable and efficient IR wireless data
transfer and quick and easy wireless printing.
- Compatible
with Palm O.S.-,Windows CE-, Symbian-based PDA, IrDA-enabled
cellphone, smart phone, industrial data terminal , notebook
PC, and consumer devices.
- IR Print
Application Software For PDA--Available separately and as
free demo, OEM driver is also available.
- ACTiPrintCE--The
premier mobile printing solution for WindowsCE-based Pocket
PC. It prints Pocket Word and rich text (RTF) documents
with full formatting, color and images, Emails, and plain
text (TXT) files. It prints to a wide variety of infrared
(or IR adapter-enabled) parallel and serial printers.
- ACTiPrintPalm: The
easy to use mobile printing solution for Palm O.S.-based
handheld devices. It prints Memo, Email, Contact, Calendar,
Todo, to most infrared (or IrDA adapter-enabled) parallel
and serial printers.
Order
| Price
List
Tech-Support |
Click for detailed spec.
(Check Compatibility here) |
IR100MU (IrDA-USB Printer Adapter)
- Simply attach to a printer using USB port and gives printing from the IrDA enabled devices.
- Supports all SIR speeds (9.6k, 19.2k, 38.4k, 57.6k and 115.2k bps). Compatible with most IrDA devices with IrLPT protocol such as notebook PC, Cellphone, Modem, Instruments, Data Terminals, Digital Camera, Image Capture Devices and others
- Easy to use and no driver is required.
USB-RJ45 conversion cable plays as an interface between ACT-IR100MU and USB cable from printer to enable the printer wireless capability.
(Optional USB Printer cable USB
type A-B with 180 cm: ACT1-213 or
120 cm Conversion cable ACT1-214 is
available for order also.- see
NOTE
below)
- True PnP (Plug And Play) and hot insertion capability
- Compliant with USB 1.1 specification (HOST) and IrDA (IrLPT 1.4) specification
- Obtains power from AC power adapter:
7.5 V DC 300 mA;
power jack pin 1.3 mm dia; Inside positive Ve polarity.
- Low power consumption.
- Compact size.
-
NOTE: The bundled 10 cm
conversion
cable (RJ45 male-to-USB type A female) will NOT connect to
the USB type B connector of USB printers. This short cable
connects to IR100MU's RJ45 port and USB printer cable's USB
type A male connector. We assume users already have
USB-A/B printer cable with their USB printers to connect to
PC.
But if your USB printer doesn't bundle with, and you have not
bought any USB-A/B printer cable, then you'll need to
buy our ACT1-213 cable, the standard USB
printer cable (USB type A male-to-USB type B male) OR
120 cm
ACT1-214
longer conversion cable to direct connect
to printer.
Order |
Price
List
Tech-Support |
Click for detailed spec.
(Check Printer
Compatibility here) |
ACTiPrintCE SW, ACTiPrintPalm SW (IR Print Software for Windows
CE & Palm)
- The Premier
Mobile Printing Solution for the Pocket PC.
- Prints Pocket
Word documents, Emails, rich text (RTF) and plain text (TXT)
files.
- Pocket Word
and RTF files are printed with full text formatting, including
multiple fonts, text attributes (color, plain, bold, italic,
underline, strike-through) and justification (left, center
right).
- Images contained
within documents are also printed. Emails and plain text
files are printed using any available font. ACTiPrintCE
prints to a wide variety of infrared and serial printers.
Order
| Price
List
Tech-Support |
Click for detailed spec. |
|
| |
| IrDA PC RS232
and USB Adapters (Needs No External Power) |
IR100UD/IR120UD/IR100UD-v2/v3
(Intelligent
dongle) (USB
to IrDA SIR Adapter, with optional IR8260D evaluation Kit, OK for
Mac OS, Android/
Windows 7/8/8.1/10/11
32&64bit)
-
Supports mandatory IrDA®
layer: IrPHYTM, IrLAPTM, IrLMPTM,,
TinyTPTM and IASTM.
-
Supports upper layers
IrCOMMTM,
IrLPTTM, and
OBEXTM
-
Supports both IrDA Primary and
Secondary mode, changeable by COMSET utility.
-
Supports host baud rate from 1.2
kbps to 115.2 kbps, which is changeable by COMSET utility.
IrDA baud rate from 9.6 kbps to 115.2 kbps, which is
flexible setting by IrDA devices.
-
[Factory
Default Setting]: Baud rate =115.2k bps;8N1
-
Supports Windows 98/ME/2000,
Windows XP SP2/Vista/7/8/8.1/10/11(32 &
64 bit),
Windows Server 2003/2008 (32 & 64 bits),
Mac
OS (both Intel & Power PC),
Android, Linux,
Windows -CE (ARM & x86)
-
USB to RS232 Serial conversion
device and its driver creates Virtual COM port, which has
Less Latency time compared with any other virtual COM port,
average 1.5 ms. while that of a real COM port is about 0.5ms.
-
Fully compliant
with USB 2.0 (Full speed, 12 Mbps).
-
Two chips in
this dongle: USB chip and IrDA chip. USB chip has 256 bytes
outbound buffer and 256 bytes inbound buffer.
-
Nothing
or minimum changes in user software, which are already
working with ACT-IR100SD RS232 serial adapter.
-
Power supplied
from USB directly.
-
Evaluation Kit Full Set is
ACT-IR100UDK/100UDK-v2/v3, which
includes: ACT-IR100UD(-v2/v3) and ACT-IR402xU or
IR2012UL (IrDA FIR USB
adapter)..
Order
| Price List
Tech-Support |
Click for detailed spec.
|
|
IR210L
(Low-Speed IrDA Motherboard
Adapter) |
- Plugs
easily into IrDA-SIR ready desktop PC motherboard.
- Gives you
the full IrDA speeds from 9.6K to 115.2K bps!
- Back panel
bracket/cable assembly included.
Order
| Price
List
Tech-Support |
Click for detailed spec. |
IR220L+/IR200L/IR220Li (PC RS232
Adapters with either "Native" Windows IrDA Driver or RAW IR)
IR220LR/LRS/LRB0/LRN#(PC
RS232 Adapters for Ruggedized, Industrial Applications)
- Endure tough
weather or environment!
- Operates
under extended temperature range and meets NEMA specification.
- Optional
cable with four different types:
220LR --RJ45
Cable
220LRS --RJ45 Shielded Cable
220LRB0 --RS232 DB9F Cable
(above 3 types provide 4 speeds 9.6, 19.2, 57.6, 115.2 kbps
which user can dynamically set one of them on the
application software.)
220LRN#
--RS232 DB9F Cable (#
is customized single speed
factory preset;
96 for 9.6,
19 for 19.2,
57 for 57.6, or
115 for 115.2 kbps)
Order
| Price
List
Tech-Support |
Click for detailed spec. |
| |
Compatible with LASCAR’s PANEL-IR PCBA module.
|
IR220LDB-LA
(RS232 Raw IR Adapter PCBA for Display Panel)
- Uses IrDA-v1.0, RAW IR communication standard.
- Connects to microcontroller, UART, or EasyLog module.
- Half duplex communications.
- 10-way pin header.
- Supports 9600 bps (Other data rates are available by request).
- IR pulse: 1.63 µS.
- No IrDA protocols supported, supports only Raw IR.
- Compatible with LASCAR’s PANEL-IR PCBA module.
- Default
Baud Rate: 9.6 kbps
Order |
Price
List
Tech-Support |
Click for detailed spec. |
ACTiLinkACPI SW (Works with IR220L+ to Enable RS232 Port Power,
for Notebook PC)
IR2002UL (IrReady FIR
PC-USB Adapter supports Windows 11/10/8.1/8/7/Vista/Windows CE/Mac/Linux,
Windows server2003)
- Easily connects
to the USB port on any PC. No power needed!
- Gives you
the full IrDA speeds from 9.6K to 4M bps!
- Supports
Windows 98SE/ME/2000,
Windows XP, Vista &
Windows 7/8/8.1/10/11
& Windows server 2003
(32 & 64 bit)
,
with
WHQL
certified;
Windows CE 4.2 & 5.0 (USB
host),
Linux
& .Mac 10.2 (IPower PC
based)
Note: there is some issue with
Mac OS IrDA stack, so please contact
Tech-Support before buying for Mac OS.
- For Windows 11/10(32-&64-bit) OS support:
Please contact ACTiSYS' T-S team by an email, tech-support@actisys.com, for Windows 11/10, 32-&64-bit OS compatible driver and workaround solution.
-
Key parameters
programmable (Extra BOF's; Min. TAT; Speed Enable; Read
Depth, Read Threshold; etc.)
-
Note (IrComm issue):
If you use IrDA-OBEX, these USB-IrDA adapters support
Windows 7/8/8.1/10/11-32 and 64 bit. But, if you use IrDA-IrComm,
you'll need
IrComm2K
( free software from 3rd party) for all Windows O.S.,
including Windows 11/10/8.1/8/7-32 bit. However,
IrComm2K
does NOT support
64bit.
then please use our once-for-all solution,
ACT-IR100UD(-v2), the Intelligent USB-IrDA adapter.
Order
|
Price
List
Tech-Support |
Click for detailed spec.
|
IR2012UL (IrReady FIR
PC-USB Adapter supports Windows 11/10/8.1/8/7/Vista/Windows CE/Mac/Linux,
Windows server2003)
- Easily connects
to the USB port on any PC. No power needed!
- Gives you
the full IrDA speeds from 9.6K to 4M bps!
- Supports
Windows 98SE/ME/2000,
Windows XP, Vista &
Windows 7/8/8.1/10/11
& Windows server 2003
(32 & 64 bit)
Note: there is some issue with
Mac OS IrDA stack, so please contact
Tech-Support before buying for Mac OS.
- For Windows 11/10(32-&64-bit) OS support:
Please contact ACTiSYS' T-S team by an email, tech-support@actisys.com, for Windows 11/10, 32-&64-bit OS compatible driver and workaround solution.
-
Key parameters
programmable (Extra BOF's; Min. TAT; Speed Enable; Read
Depth, Read Threshold; etc.)
-
Note (IrComm issue):
If you use IrDA-OBEX, these USB-IrDA adapters support
Windows 7/8/10/11-32 and 64 bit. But, if you use IrDA-IrComm,
you'll need
IrComm2K
( free software from 3rd party) for all Windows O.S.,
including Windows 11/10/8/7-32 bit. However,
IrComm2K
does NOT support
64bit.
then please use our once-for-all solution,
ACT-IR100UD(-v2), the Intelligent USB-IrDA adapter.
Order
|
Price
List
Tech-Support |
Click for detailed spec.
|
IR4002US (IrDA
FIR PC-USB, Thumb-Size Adapter supports Mac, Vista/Windows 11/10/8.1/8/7,
Windows CE/Linux, Windows server2003
- Wireless
data transfer for PC's USB port
- IR data
rates from 9.6 Kbps to 4Mbps
- Thumb-size
USB-FIR (4Mbps) adapter, the smallest on the market
- Supports
Windows 11/10/8.1/8/7/Vista & XP (32 & 64
bit),
Windows 2000/ME/98SE;
Windows server 2003, Windows CE4.2&5.0, Linux and Mac10.2 (Power PC).
Note: there is some issue with
Mac OS IrDA stack, so please contact
Tech-Support before buying for Mac OS.
- For Windows 11/10(32-&64-bit) OS support:
Please contact ACTiSYS' T-S team by an email, tech-support@actisys.com, for Windows 11/10, 32-&64-bit OS compatible driver and workaround solution.
- 100cm cable
included for desktop PC
-
Note: please refer Note on IrComm
issue on IR2002UL.
Order
|
Price
List
Tech-Support |
Click for detailed spec. |
IR4020U/IR4021U
(IrSimple
& IrDA VFIR/FIR USB Adapter, supports Windows 11/10/8.1/8/7,Vista, Linux/Mac) 
IrSimpleTM
- This
series has 2 models:
IR4020U is VFIR (16 Mbps); IR4021U
is FIR (4 Mbps)
- Fully compliant to USB specification 2.0
- Fully compliant to IrDA serial infrared physical layer specification 1.4
- Supports Windows 98SE/2K/XP/Vista,
Windows 7/8/8.1/10/11, Linux & Mac
10.2x or above (Power PC only; not Intel Based
PC)
- For Windows 11/10(32-&64-bit) OS support:
Please contact ACTiSYS' T-S team by an email, tech-support@actisys.com, for Windows 11/10, 32-&64-bit OS compatible driver and workaround solution.
- Bus-powered device. Obtain power from USB port. No external power supply required.
- Low power consumption in standby mode (Standby current is less than 0.5 mA)
- Not occupy PC's COM or Parallel port and has no complicated hardware port and resource setting.
-
Note: The existing bundled
driver could play IrDA function
only! Still you can also run
IrSimple application as long as
you use compatible driver/software yourself.
Please also refer to
IrS402x, which is already bundled with IrSimple driver &
software.
Order |
Price
List
Tech-Support |
Click for detailed spec. |
|
|
| IrDA or
IR Embedded RS232 Adapters and Internal Modules |
| |
Instantly Convert Rs232 Port to IrDA, Without Special IrDA SW |
IR100SD,
IR100SL&IR100SLM(already upgraded to IR100SD),
IR100SL-i,
IR100Sx
Comparison Table
IR110SD (Embedded RS232 Adapter with IrPHY+Protocol, Selectable Host Baud Rate; Battery Operated)
- Supports mandatory IrDA layer: IrPHY, IrLAP, IrLMP and IAS.
- Supports upper layers TinyTP, IrCOMM, IrLPT, and OBEX transport.
- Supports host baud rate from 1.2 kbps to 115.2 kbps, which is changeable by utility;
IrDA baud rate from 9.6 kbps to 115.2 kbps, which is flexible setting by IrDA devices.
- Supports both IrDA Primary and Secondary mode, changeable via Comset_IR100SD.exe.
- [Factory Default
Setting]: Baud rate =115.2k bps;8N1
- Battery
operated intelligent adaptor; Optional AC power adapter
available.
- No driver is needed.
- IR frame and Host buffer are 2048 bytes separately.
- Supply voltage: 6.0 V to 12 V.
- Power consumption: 1.650 mA on standby mode, 60 mA on active mode.
- Supports 3 wires host interface (Tx, Rx and GND).
- Interface to Host:
- Full duplex asynchronous serial (TXD, RXD)
- Hardware flow control (RTS, CTS)
- Optional line status for link control (DTR, DSR)
Order |
Price
List
Tech-Support |
Click for detailed spec. |
IR100SD OBEX Server (IrDA Intelligent RS232 Adapter- OBEX Server)
- Supports both IrDA Primary and Secondary mode, changeable via PC utility.
- Supports mandatory IrDA layer: IrPHY, IrLAP, IrLMP and IAS.
- Supports upper layers TinyTP, IrCOMM, IrLPT, and OBEX PUT/GET server.
- No driver is needed.
- Supports host baud rate from 1.2 kbps to 115.2 kbps.
IrDA baud rate from 9.6 kbps to 115.2 kbps.
- [Factory Default
Setting]: Baud rate =115.2k bps;8N1;Ignore CTS/DSR = No;
Device roll mode = Secondary only; Primary Protocol = OBEX
TRANSPORT
- IR frame and Host buffer are 2048 bytes separately.
- Supply voltage: 6.0 V to 12 V.
- Power consumption: 20 mA standby, 50 mA active.
l Supports 3 wires host interface (Tx, Rx and GND).
- Interface to Host:
- Full-duplex asynchronous serial (TXD, RXD)
- Hardware flow control (RTS, CTS)
- Optional line status for link control (DTR, DSR)
- Other unused inputs (RI, CD)
- Designed for use in RS232C level and it is in
DTE (Data Terminal Equipment) configuration.
Order |
Price
List
Tech-Support |
Click for detailed spec. |
ACT-IR224UN-Li2/Li
"Animus Insulin pump (such as the Animas OneTouch Ping or Animas Vibe) patients require an ACTiSYS' IR224UN-Li2/IR224UN-Li infrared (IR) cable, to upload data!"
-
Supports baud rates: 9.6, 19.2, and 115.2 Kbps.
-
Fully compliant with USB 3.0 (also backward compatible with USB 2.0)
- Supports Windows 11/10/8.1/8/7(32 & 64 bits)Vista/XP/2000, Android, Mac OS (both
Intel & Power PC), Linux and
Windows CE (both ARM & X86)
- CD
for setup & manual
|
|
|
Order
|
Price
List
Tech-Support |
Contact us for
spec |
IR224UN
(PC or embedded USB to Raw SIR Serial Adapter, IrPHY Only)-Supports Windows
11/10/8.1/8/7/Vista, Android,
Linux, Windows CE & Mac
-
Supports baud rates: 1.2, 2.4, 4.8, 9.6, 19.2, 38.4,
57.6, 115.2 Kbps.
-
USB interface; compatible with and directly replaces Raw IR RS232 adapters: IR220L+,
IR220L, IR220Li and IR220LN
-
Customization to IR224UN-Li,
IR224UN-L+,
IR224UN-LN(96 ~115)
at factory is OK. [Factory Default
Setting] : IR224UN-LN115
- Also compatible with competitors' models: IFSYS 8001A Level mode
(=IR224UN-IF-level) & Pulse mode
(=IR224UN-IF-pulse).
- Fully compliant with USB 2.0
- Supports Windows 11/10/8.1/8/7(32 & 64 bits)Vista/XP/2000,
Android, Mac OS (both
Intel & Power PC), Linux and
Windows CE (both ARM & X86)
- CD
for setup & manual
|
|
|
Order
|
Price
List
Tech-Support |
Contact us for
spec |
IR224UN-L210
(USB connector of IR Serial Adapter,
Compatible with Tekram IRMate IR210)-Supports
Windows 11/10/8.1/8/7/Vista, Linux, Windows CE & Mac,
-
Supports baud rates: 1.2, 2.4, 4.8, 9.6, 19.2, 38.4,
57.6, 115.2 Kbps.
-
Compatible with Tekram IRMate IR210,
as USB interface of IR adapter.
-
IR224UN-L210 vs IRMate IR210; IR410W-Comparison
-
IR pulse:
1.63μS.
-
No IrDA protocol supported, only
Raw IR (IrPHY only).
-
Virtual COM port supported.
Nothing or minimum change in users' software, which already
worked well with original Raw IR RS232 adapters.
-
Less latency time, average 1.5
mS. Latency of a real COM port is 0.5 mS.
-
Fully compliant with USB 3.0
-
256 bytes outbound buffer and
256 bytes inbound buffer.
-
Supports Windows 2000/
XP/Vista/7/8/8.1/10/11, Mac OS, Linux and Windows CE.
|
|
|
Order
|
Price
List
Tech-Support |
Contact us for spec |
IR424UN
(USB to Raw SIR Serial Adapter- Thumb sized,
IrPHY Only)-Supports Windows
11/10/8.1/8/7/Vista, Android,
Linux, Windows CE & Mac
-
A thumb sized option of IR224UN
- housing similar to
IR4002US, with Black case
-
Supports baud rates: 1.2, 2.4, 4.8, 9.6, 19.2, 38.4,
57.6, 115.2 Kbps.
-
USB interface; compatible with and directly replaces Raw IR RS232 adapters: IR220L+,
IR220L, IR220Li and IR220LN and above USB adapter IR224UN
-
Customization to IR424UN-Li,
IR424UN-LN(96 ~115) & IR424UN-L+
at factory is OK. [Factory Default Setting] : IR424UN-LN115
- Also compatible with competitors' models: JetEye 9680
Level mode(=IR424UN-JE-level) & Pulse mode(=IR424UN-JE-pulse),, IFSYS 8001A Level mode
(=IR424UN-IF-level)
& Pulse mode(=IR424UN-IF-pulse)
- Fully compliant with USB 2.0
- Supports Windows 11/10/8.1/8/7(32
& 64 bits)Vista/XP/2000, Android, Mac OS (both
Intel & Power PC), Linux and
Windows CE
(both ARM & X86)
-
CD
for setup & manual
|
|
|
Order
|
Price
List
Tech-Support |
Contact us for
spec |
| |
Instantly Convert RS232 Cable to RAW IR, Without Special IR SW!
|
IR220LN, IR200Li (PC
or Embedded RS232 Cable Replacement, IrPHY Only)
-
Instantly
convert RS232 Port to RAW IR, without any IrDA protocol
SW and use
existing application SW.
-
True
cable-to-IR replacement using IrDA component, but not
IrDA protocol SW.
-
No SW Modification
Required: Single IR Speed using IR220LN/Li.
-
Since they are all
RAW IR and OS independent, so it is workable for all
Windows and other O.S.
Order
| Price
List
Tech-Support |
Click for detailed spec. |
|
| |
| IR Long
Distance Embedded RS232 Adapter |
IR320L
(Embedded Infrared RS232 Adapter-30 Meters)
| |
Long
Distance Infrared Adapter |
- Long distance transmitting / receiving adapter by using 455 KHz ASK-IR technology.
- Supports maximum 30 meters transmitting / receiving distance.
- Supports 9.6 kbps, 19.2 kbps and 38.4 kbps baud rate.
- Instantly converts RS232 Port to IR, without special IrDA protocol SW and uses existing application SW.
- True cable-to-IR replacement using ASK-IR technology.
- No buffer in circuit, no delay caused.
- You should use
it in pairs.
Order
| Price
List
Tech-Support |
Click for detailed spec. |
|
IR826xD
Series: IrDA Protocol Processor IC
; With
(IR Transceiver
Bundle) available
-
ACT-IR8260D
/ACT-IR8261D
(or briefly, ACT-IR826xD)
has
a complete IrDA® Protocol
stack in a single chip.
-
ACT-IR8261D has more buffer than ACT-IR8260D. This
is the only difference between them.
- Buffer
size:
|
|
Buffer (Bytes) |
|
|
Host Inbound |
Host Outbound |
IrDA In Frames
|
IrDA Out Frames
|
Total |
|
ACT-IR8261D |
2K |
2K |
1K |
1K |
6K |
|
ACT-IR8260D |
1K |
1K |
0.5K |
0.5K |
3K |
- No any driver needed.
- Includes
IrPHY™
encoding/decoding and interfaces directly to Infrared
transceivers for data rate up to 115.2 kbps. Only an
external Infrared transceiver is needed to complete an
IrDA compliant infrared communication subsystem.
- Supports
mandatory IrDA layers: IrPHY™,
IrLAP™,
IrLMP™
and IAS™.
- Supports
upper layers:
TinyTP™,
IrCOMM™,
IrLPT™,
and OBEX™.
-
Supports
host baud rate: 1.2
kbps to 115.2 kbps, which is changed by PC configuration
utility or hardware jumper. IrDA baud rate: 9.6 kbps
to 115.2 kbps,
which is flexible, setting by IrDA devices.
- Supports
both IrDA Primary and Secondary modes.
-
Small low profile plastic 64-pin QFP package.
-
Available in programmed and tested chips, assembled &
tested boards, or fully packaged
dongles.
All passed IrDA-
"IrReadyTM" certification tests!
- A
ready-made
IrDA-compatible
evaluation
dongles
ACT-IR100UD-v2 is
available.
- ACT-IR826xDEK
= ACT-IR826xDDB
(Daughter Board) + ACT-IR8260DMB (Mother Board with
USB Virtual COM port support).
Before purchasing this
IC,
strongly
recommend to
buy
this Evaluation
Kit. Default is ACT-IR8260DEK, which used IR8260D on
Daughter Board IR8260DDB. Optional is ACT-IR8261DEK,
which used IR8261D on Daughter Board IR8261DDB.
- ACT-IR100UDK-v2:
Evaluation Kit Full Set
(=ACT-IR100UD-v2 +
ACT-IR4002US/4000US
or IR2002US/2000US).
This kit can
evaluate data transmission between ACT-IR100UD-v2 (your
device) and ACT-IR4002US (PC), running under
HyperTerm.
It can avoid debugging multiple issues at the same time.
Order
|
Price
List
Tech-Support |
|
IR8250P: IrDA
Compliant Protocol Processor
- A
complete IrDA Protocol
stack in a single chip, including mandatory protocols (IrPHY,
IrLAP, IrLMP) and optional protocols (IrLPT,
IrCOMM+TinyTP, OBEX transport or TinyTP with customized
IASTM class name for IrSocket).
-
Small
Size, low price , low power consumption, Secondary only,
easy to implement into embedded systems
-
Includes IrPHY encoding/decoding, and interfaces
directly to IR transceivers for data rate from 9.6 kbps
up to 115.2 kbps. Only an external IR transceiver is
needed to complete an IrDA compliant IR communication
subsystem.
-
Supports 64 bytes
data packet for IrDA IrLAP frame.
-
Supports host baud
rate from 300 kbps to 115.2 kbps selecting by
programmable settings.
-
28-pin SSOP/TSSOP
package.
-
In-system-programmable FLASH, facilitates firmware
changes or updates.
IR8250PEK: IR8250P
Evaluation Kit,
including IR82x0PMB (Mother Board),
IR8250PDB (Daughter Board), & Self-downloadable SW
to program IR8250P firmware
IR8250SW
: Easy customized setting,
Re-Programming Windows Software for
Evaluation
Kit, IR8250PEK
IR8250P
& MCP215x Comparison-Introduction
Order
|
Price
List
Tech-Support |
Click for detailed
spec. |
IR82x0D:
IrDA Compliant Protocol Processor
- Secondary,
Primary,
or primary + secondary stack, single chip, software or
hardware-selection of RS232 data, primary/secondary, and IrDA protocol parameters, large buffer size for IrDA and
host interface. Supports all IrDA application protocol layers including OBEX 8Kbyte
(IR8200D) /2Kbyte
(IR8210D) on chip SRAM.
IR82x0D-EK:
=
ACT-IR82x0D
+
ACT-IR100SD/IR100UD.
Before purchasing ACT-IR82x0D chip, strongly
recommend to buy a set of Evaluation Kit:
IR8200D OBEX Server:
Full
secondary,
Primary, or primary+secondary stack,
single chip, software or hardware-selection of RS232 data, primary/secondary, and
IrDA protocol parameters, large buffer size for IrDA and host interface. Supports all
IrDA application protocol layers including OBEX Server (PUT/GET). 8Kbyte on chip
SRAM.
Order
|
Price
List
Tech-Support |
Click for detailed spec |
|
| IrDA
SIR Encoder/Decoder IC |
IR220VACF
(IrDA-1.0
Encode/Decode IC)
- Device
is O.S. independent and does not need any driver.
- Products
using IR220VACF already passed the tough " IrReady" certification
test.
- Compatible with
all brands of IrDA transceivers.
- In volume
applications since 2002.
- IrPHY encoding/decoding
and interfaces directly to IrDA transceivers.
- 3 V to 5.5 V operating
voltage.
- Using minimum pulse
duration of 1.63 µs to modulate bit data.
- Programmable baud
clock generator (9600bps to 115.2 Kbps) 5 baud rates.
- Low operating current.
- SOP14 -- package.
-
Optional with EK (Evaluation Kit)
is
available
Order
|
Price
List
Tech-Support |
Click for detailed spec. |
|
| IrFM
- IrDA Wireless Mobile Payment |
| |
IrDA Fast Connect Development/Test Suite |
IR303FM
(IrFM
with Fast Connect Debug/Test Suite, Hardware and Software)
|
The Fast Connect Development/Test Suite (ACT-IR303FM) is a set
of hardware and software products designed to test and debug
Fast Connect for IrFM PTD and/or POS under development.
Benefits
of ACT-IR303FM Suite:
- Facilitates
testing and debugging of Fast Connect for IrFM PTD and/or
POS.
- Promotes
inter-operability of Fast Connect for IrFM PTD and POS.
- Speeds up the IrDA
certification process.
- Speeds up time to
market.
Hardware/Software
products Included in the Suite:
- IrFM PTD Fast Connect
Simulator Hardware (IR203L and SW (ACTiLinkPTD).
- IrFM POS Fast Connect
Simulator Hardware (IR223L) and SW (ACTiLinkPOS).
- Fast Connect Recording
Hardware (IR910D) and Software (IR912SW).
- Fast Connect Recording
Analyzer Software (IR913SW).
Order
| Price
List
Tech-Support |
Click for detailed spec.
Click for detailed spec. |
| |
IrFM POS Adapter and Protocol IC |
IR103SL/SLi/IR8203L
(IrFM
POS/Host RS232 Adapter, Internal Module & Protocol IC)
|
IrFM POS Front End Adapter is a sub-assembly designed specifically
to handle the lower level IrDA protocol layers for IrFM POS. It
is a ready to use, assembled and tested hardware/firmware sub-assembly
that handles IrPHY, IrLAP(including Fast Connect), IrLMP (including
IAS for IrFM OBEX), and TinyTP. Physically, it can be as external
RS232 adapter (IR103SL),internal PCB(IE103SLi),or protocol IC(IR8203L).
Features
of IR103SL & IR8203L:
- Simple wired
serial interface to the hosting IrFM POS.
- Automatically
handles Fast Connection. Newly published by IrDA, January
15,2003)without burdening the hosting IrFM POS.
- Efficiently
and automatically handles the minimum turnaround, maximum
turnaround, and all time critical requirements.
- Compliant
to IrDA requirements for IrPHY and IrLAP layers.
- Very low
component count. Small and modular in construction.
- Low cost,
low
power.
Order
| Price
List
Tech-Support |
Click for detailed spec. |
|
IR3200M+IR3200SW (Hand-held BER/Bit Error Rate Tester and Software)
- Connecting
it to the notebook USB Port, facing the FIR window to do
simple loop test!
- Pocket size,
4 AA battery operated. Test status indicated by LED's or
audio.
- To easily
test IrDA-enabled PDA, smart cell phone, data terminal,
printer, sub notebook, etc.
- Using a
fixture driven by the second IR3200M, you can test IrDA
transceiver modules!
Order
| Price
List
Tech-Support |
Click for detailed spec. |
| |
IrDA
Protocol Probe |
IR910D+IR910SW
(IrDA Protocol
Probe Monitor and Debug Software)
- IR910D (Dual
IR head adapter) and IR910SW work together to record IrDA
protocol conversation from 9.6K to 115.2 Kbps.
- It is a
very useful tool to visualize the actual IrDA communication
traffic, translated into IrDA data packet frame structure,
as well as the timing information, making debugging more
effective and accurate.
- It not only
records IrDA data traffic but also the valuable timing information
down to byte level which is shown in the LOG_PHY.TXT output
file.
- It does
not decode or interpret OBEX or any layers above IrLMP layer,
but all the information is preserved for you to read, e.g.
Output LOG_LMP.TXT sample is an OBEX session.
- It is a
three-step process. Step one is to record the IrDA traffic.
Step two is to translate the recorded data to text files.
And step three is to view the text files. Each step has
the associated software module to enable such functions.
- The recorded
data is written into a binary file LOG_RAW.BIN. This file
can be analyzed and translated into text files.
- You may
use any editor or word processor to view the ASCII text
files generated. These text files are almost self-explanatory.
Order
| Price
List
Tech-Support |
Click for detailed spec. |
IR9201 (IrDA Intensity Meter)
- To capture IR transmitter intensity
- Maximum IR pulse frequency supported: 0.625 MHz (applicable up to SIR 115.2 kbps)
- Easy to measure IR optical power, no need to know hardware details
- Easy to interface with oscilloscope using BNC cable
- Power: 9 V DC, 6F22DT battery
Order |
Price
List
Tech-Support |
Click for detailed spec. |
IR2000B/L:
IrDA ISA-Bus Add-On Card with Adapter
|
| ACTiSYS
Sharp Zaurus/Wizard Accessories |
ACTiSYS is the Oldest and Leading PDA peripheral
supplier, since 1989! We provide the Only IR device for Both Wizard
and Zaurus! One pocket fax modem for Both PDAs and PCs! Intelligent
cables are FCC approved & drain no battery power from PDAs!
|
-
IR3S+:
Wireless printing and file transfer in one unit for Sharp Zaurus, Wizard
Intelligent Link Cables
- ACT1-101:
PC Direct Link Cable
- ACT1-103:
Mac Direct Link Cable
PCMCIA Fax/Modem for Zaurus
- ACT2-104:
33.6K bps Fax/Data Modem
|
|
|
|
